Aiper Scuba X1 assessment: If appears to be like might clear your pool

[ad_1]

At a look Knowledgeable's Score Execs

Handy wi-fi charging dock

Very efficient at capturing fantastic specific matter

A number of cleansing modes, together with a waterline scrubber

Cons

Subpar efficiency selecting up bigger particles

Cleansing the filter basket is a large headache

Very expensive for the extent of efficiency

Our Verdict The Aiper Scuba X1 appears to be like—and is priced—like a high-end robotic pool cleaner, but it surely’s a weak performer and it’s a bear to scrub after a session within the pool.

Value When Reviewed

This worth will present the geolocated pricing textual content for product undefined

Greatest Pricing Immediately

Value When Reviewed $1199.99

Greatest Costs Immediately: Aiper Scuba X1

$1,099.99

Aiper makes some glorious robotic pool cleanrs—similar to its stellar workhorse, the Seagull Professional—but it surely additionally has a couple of duds in its arsenal, together with the Seagull Plus and the Scuba S1. With its newest robotic, the Scuba X1, Aiper appears to be like to carry some higher-end options (together with sensible connectivity) to the lineup. With a road worth of $1,200, it’s one in all Aiper’s most costly fashions–and it’s received the gold trim to show it.

Specs

The Aiper Scuba X1 doesn’t change the fundamental design that the majority of Aiper’s full-size robots have adopted for years: Examine its design to the aforementioned Seagull Professional, Seagull Plus, and Scuba S1. The 24-pound Scuba X1 runs on two treads that sandwich two front-mounted cylindrical brushes that do the heavy lifting; somewhat, the heavy scrubbing. All black with the aforementioned gold accents, the design is modern and orca-like. If nothing else it actually appears to be like the a part of a $1,000-plus pool robotic.

The MicroMesh system within the Aiper Scuba X1’s particles basket is efficient at capturing fine-grained grime.

The unit features a 7800mAh battery that Aiper says ought to present a operating time of three hours and helps a most pool measurement of two,150 sq. ft. A single onboard button helps you to energy up the robotic and select an working mode: “sensible mode” (flooring and partitions), flooring solely, partitions solely, or waterline solely (the place the robotic strikes vertically alongside the pool wall to wash the tile).

<img decoding="async" data-wp-init="callbacks.setButtonStyles" data-wp-on-async--click="actions.showLightbox" data-wp-on-async--load="callbacks.setButtonStyles" data-wp-on-async-window--resize="callbacks.setButtonStyles" src="https://b2c-contenthub.com/wp-content/uploads/2025/04/Aiper-Scuba-X1-clean-debris-basket.jpg?quality=50&strip=all&w=1200" alt="Aiper Scuba X1 clean debris basket" class="wp-image-2687740" width="1200" height="800" loading="lazy"/> Aiper’s MicroMesh filter is a bit of cloth that wraps round an inside filter field.

Christopher Null/Foundry

A further mode, “scheduled,” is barely accessible within the Aiper app and instructions the robotic to run for 50 minutes, cleansing the ground solely, as soon as each 48 hours, till its battery dies. A big LED bar on the highest of the robotic signifies when it's charging (pulsing pink, blue, or inexperienced, relying on cost stage), able to run (strong inexperienced), or completed working (strong pink), together with utilization for numerous error modes.

The unit is charged through a handy docking station that connects to wall energy and eliminates the necessity to manually plug the robotic in after every run. The dock is easy to snap collectively out of the field, with none instruments required.

The filter basket requires particular consideration due to its three-piece design. A standard outer basket collects bigger particles, whereas a “MicroMesh ultra-fine filter” picks up smaller morsels of grime and sand. The MicroMesh filter is a bit of cloth that wraps round an inside filter field, which doesn’t do something besides maintain the MicroMesh in place. All three items are sandwiched collectively when put in; I’ll discuss concerning the effectiveness of this setup in a bit.

Efficiency

<img decoding="async" data-wp-init="callbacks.setButtonStyles" data-wp-on-async--click="actions.showLightbox" data-wp-on-async--load="callbacks.setButtonStyles" data-wp-on-async-window--resize="callbacks.setButtonStyles" src="https://b2c-contenthub.com/wp-content/uploads/2025/04/Aiper-Scuba-X1-debris-basket.jpg?quality=50&strip=all&w=1200" alt="Aiper Scuba X1 debris basket" class="wp-image-2687742" width="1200" height="800" loading="lazy"/> Aiper’s MicroMesh filter is efficient at trapping particulate matter, but it surely’s a serious ache to scrub. Christopher Null/Foundry

As with practically all robotic pool cleaners, the Scuba X1 is activated by inserting it on flat floor, powering it up, deciding on an working mode, and dropping it into the pool. In the usual sensible mode, it first cleans the partitions, then strikes to the ground, transferring comparatively methodically and slowly because it sweeps forwards and backwards. The unit does spend a protracted whereas idling on the pool flooring every time it must make a flip, apparently attempting to determine its subsequent transfer, earlier than it will get going once more.

In my pool, I by no means received greater than 2.5 hours of operating day out of the robotic, in comparison with the three hours Aiper specifies. The larger challenge, nevertheless, is that the robotic missed fairly a bit of fabric throughout its runs in my pool. On common, it collected solely about 90 p.c of check particles, whether or not natural or artificial, abandoning leaves on the underside of the pool. That’s fairly a poor exhibiting for a robotic on this worth vary, and arguably the unit’s greatest shortcoming.

<img decoding="async" data-wp-init="callbacks.setButtonStyles" data-wp-on-async--click="actions.showLightbox" data-wp-on-async--load="callbacks.setButtonStyles" data-wp-on-async-window--resize="callbacks.setButtonStyles" src="https://b2c-contenthub.com/wp-content/uploads/2025/04/Aiper-Scuba-X1-dock.jpg?quality=50&strip=all&w=1200" alt="Aiper Scuba X1 dock" class="wp-image-2687745" width="1200" height="800" loading="lazy"/> The Aiper Scuba X1’s charging dock plugs into an out of doors outlet, so that you don’t want to pull any cords to the robotic pool cleaner itself.

Christopher Null/Foundry

A detailed second, nevertheless, is cleanup. Whereas the MicroMesh system is efficient at capturing fine-grained grime, it's a huge ache to scrub. First, the mesh filter have to be indifferent from the inside filter field, which is a problem when it’s dry and an enormous problem when it’s moist and soiled.

Disconnecting the assorted clips and tabs that maintain the filter in place is a chore even earlier than you set about cleansing it. A hose doesn’t do the trick; I recurrently wanted to make use of a scrub brush to get the filter principally free from particles, all of which meant a substantial quantity of effort and making fairly a multitude as well. I’ve by no means spent a lot time emptying a filter basket, which isn't what I count on from machine on this worth vary.

This assessment is a part of TechHive’s in-depth protection of the most effective robotic pool cleaners.

Retrieving the bot after its cleansing mission can also be a chore: Whereas the robotic can climb partitions, it may well’t pull itself out of the pool when quitting time comes, in contrast to some rivals at this worth stage. The Scuba X1 was no less than profitable at docking itself close to the wall when full, however you’ll want to make use of the included hook and a pole to elevate it from the water.

<img decoding="async" data-wp-init="callbacks.setButtonStyles" data-wp-on-async--click="actions.showLightbox" data-wp-on-async--load="callbacks.setButtonStyles" data-wp-on-async-window--resize="callbacks.setButtonStyles" src="https://b2c-contenthub.com/wp-content/uploads/2025/04/Aiper-Scuba-X1-app-screenshots.png?w=1200" alt="Aiper Scuba X1 app screenshots" class="wp-image-2687741" width="1200" height="800" loading="lazy"/> Aiper’s cell app doesn’t do a lot of something that you would be able to’t accomplish simply as simply by pushing buttons on the Scuba X1 itself.

Christopher Null/Foundry

Aiper’s app is for probably the most half superfluous. After a fast and simple Bluetooth-based setup, you’ll discover that the app can’t actually do something besides select the working mode, which (apart from the scheduled mode) you are able to do through the one button on the unit. The only real further function is a fundamental log of operational exercise and operating time, which is barely of minimal use. As with most robots, the app gained’t connect with the machine whereas the unit is within the water attributable to interference points.

Do you have to purchase an Aiper Scuba X1?

If it had a worth of $500, the Aiper Scuba X1 is likely to be a suitable lower-cost pool robotic resolution, but it surely simply doesn’t do a ok job cleansing to benefit shopping for it at its full worth of $1,200.