Dyson Scorching+Cool HF1 evaluate: an impressively sensible little fan heater, with a few drawbacks

Dyson Scorching+Cool HF1: two-minute evaluate

The Dyson Scorching+Cool HF1 is a glossy and sensible fan heater with the bladeless and aesthetically pleasing design we count on to see from the model.

With a premium checklist worth of £399.99, the Dyson Scorching+Cool HF1 may be discovered at Dyson and some different retailers. Sadly, it’s solely obtainable within the UK on the time of publishing, however I’ll present an replace if it ever makes its method off the island.

The HF1 provides ten fan speeds, three oscillation choices of as much as 70 levels, a heater that may kick out as much as 90ºF / 32ºC, and, most excitingly, some fascinating sensible options.

Throughout testing, I discovered the HF1 to be very environment friendly in each Cool and Scorching modes. The bottom setting delivered a carefully cooling breeze to me as I sat on my sofa six ft away.

There are many methods to regulate the HF1, with a number of onboard controls, a distant, and the MyDyson app, which gave me entry to the entire suite of settings and options.

I might carry out most actions with the distant, however its communication with the HF1 was a bit patchy at occasions. The MyDyson app made controlling the HF1 delightfully straightforward and provided me a wider vary of timer choices, in addition to scheduling, historic ambient temperature information, and, pleasingly, the choice to activate warmth mode remotely so I might return to a heat front room.

The fan’s quantity was completely acceptable and on par with a lot of the related followers I’ve examined. Sleeping with the HF1 a number of ft from the mattress was a easy experience, for essentially the most half. Nonetheless, when it got here to utilizing Scorching mode, I discovered that it will undergo a interval of being notably noisy for a number of moments because it obtained as much as temperature, which it will do every time the ambient temperature dropped beneath the goal I’d set.

This wasn’t so dangerous within the daytime, however as one among its promoting factors is that you should use it in your bed room in a single day to maintain the temperature at a fascinating degree, it’s value taking into account when you’re a light-weight sleeper.

In case you have youngsters or inquisitive pets, it’s additionally value noting that the metallic edging on the entrance of the air air purifier can get highly regarded in a short time, and that the kid lock solely applies to the onboard controls. So if in case you have a rampaging toddler or a slipshod cat, this might probably show inconvenient.

General, although, the Scorching+Cool HF1 is a satisfyingly environment friendly fan heater. Whereas it has a excessive price ticket, it’s value it for the efficiency and comfort, particularly with these intelligent sensible options.

If you happen to’d wish to discover extra choices, our information to the perfect followers has our high suggestions.

Dyson Scorching+Cool HF1 evaluate: worth & availability

Listing worth: £399.99Launch date: October 2025 (UK)Availability: UK solely at time of publishing

The HF1 is a premium choice full of some unbelievable options, however as is commonly the case with Dyson, it has a premium price ticket to match, costing £399.99.

The Dyson Scorching+Cool HF1 is at the moment solely obtainable within the UK, and may be bought from Dyson, Currys, and some different retailers.

There’s a worth distinction of £150 between the HF1 and the Dyson Cool CF1, which is definitely fairly cheap contemplating the addition of Scorching mode and the unbelievable sensible options.

General, with its good efficiency and various handy options, the Dyson Scorching+Cool HF1 will not disappoint if in case you have the cash to spare. Nonetheless, it’s value contemplating the drawbacks I’ve coated in my evaluate to make sure they gained’t pose an inconvenience earlier than you stretch your funds.

Worth for cash rating: 4 / 5

Dyson Scorching+Cool HF1 evaluate: specs

Dyson Scorching+Cool HF1 evaluate: design and options

Small and light-weight design, which may be tiltedThe HF1 has 10 fan speeds and outputs temperatures as much as 90ºF / 32ºCMyDyson app provides further settings and options, together with a pre-heat operate

Organising the Dyson Scorching+Cool HF1 was a fast and easy strategy of attaching the plastic base plate and connecting the HF1 to the MyDyson app.

The Dyson Scorching+Cool HF1 is conveniently sized, with a max diameter of 8 inches / 20.4cm as soon as the bottom is hooked up; nonetheless, at 23 inches / 58.5cm, it’d really feel a smidge tall for desktop use.

Although it feels a bit of incorrect, as I’m used to utilizing larger-scale codecs just like the Dyson HP10, it labored completely nicely on the ground. Whether or not you place it on a tabletop or the ground, the vertical angle of the airflow may be adjusted barely by shifting the fan’s physique backwards or ahead to tilt it.

Predictably, the Dyson Scorching+Cool HF1 fan includes a bladeless design, making it simpler to wash and a safer choice to bladed followers for individuals who occur to have curious offspring or pets.

Along with its 10 fan speeds, the HF1 can oscillate 15, 40, or 70 levels. Each of those capabilities may be adjusted by way of the onboard controls, with an influence button/dial combo that may be turned to extend or lower the fan pace, a button to cycle via oscillation angles, and one other button that permits Scorching mode.

Scorching mode provides a temperature vary of as much as 90ºF / 32ºC, and the mix of the ceramic heater plates and Air Multiplier know-how can apparently enhance whole-room temperature by one diploma in as little as 100 seconds.

Just like the Dyson Cool CF1, the Scorching+Cool HF1 additionally comes with the usual Dyson-style magnetic distant management, which may be saved on high of the loop amplifier. It options energy, oscillation, fan pace, and temperature management buttons, in addition to ones to allow sleep mode, set the timer, and interact the kid lock.

One benefit the HF1 has over the Cool CF1 is its app integration, which provides entry to a complicated vary of settings, historic temperature readings, outside air high quality information, and simple distant management, whether or not you’re out and about or sitting on the sofa. Plus, there’s the choice to attach the HF1 to your sensible dwelling system, so it may be managed with out lifting a finger.

Maybe essentially the most thrilling side of the HF1’s sensible capabilities is the power to preheat a room to your required temperature, prepared for whenever you return dwelling.

Dyson Scorching+Cool HF1 evaluate: efficiency

Good efficiency for its measurement in each Cool and Scorching modesVery straightforward to regulate, because of the MyDyson appQuiet total, however noisy whereas getting as much as temperature in Scorching mode

The Dyson Scorching+Cool HF1 was easy and easy to make use of, particularly when utilizing the app. I usually used the distant, too, however there was a little bit of a lag every time I made an adjustment, and the HF1 didn’t register the command in any respect at occasions.

When testing from my sofa, which was round 6ft / 1.8m away from the place I’d positioned the HF1, the breeze from pace one wasn’t actually detectable when the fan was static, which isn’t actually a shock contemplating its measurement. Nonetheless, after I set it to oscillate at 40 levels, it was sufficient to provide a mild and surprisingly efficient cooling breeze.

As you’d think about, the breeze felt a bit of extra outstanding with every setting enhance, till pace 5, when the airflow felt noticeably amplified, and I might hear a quiet windrush previous my ears.

The airflow was satisfyingly sturdy at high pace 10, although it was a bit of noisy at 45dB from 6 ft away, which was loud sufficient for me to wish to show the amount up on my TV.

After I measured the sound output of the HF1 in Cool mode from the same old 2ft distance, I discovered that it produced an analogous quantity to the Dyson Cool CF1 and the Levoit Circulair. Nonetheless, its readings of 29dB at pace one, 36dB at pace 5, and 50dB at pace ten, conveyed that the HF1 is a complete 10dB louder at its high pace than the Meacofan Sefte 8in.

These aren’t dangerous volumes, although, with the HF1 working as quietly as a whisper, to as loud as reasonable rainfall when in Cool mode. Some could discover the oscillation sound mildly distracting as a result of, as I found when reviewing the Cool CF1, it’s paying homage to the droning of a doc scanner. The oscillation itself is simply round 28dB, nonetheless, and the whirring was sufficiently subtle that I might go to sleep to it.

Because it’s getting mighty chilly within the UK as I write this, I’ve been very grateful to have the chance to check out Scorching mode.

I might simply discover out the present room temperature by wanting on the fan’s show or checking the app, and the temperature was very easy to regulate a level at a time utilizing the buttons or the slider within the app.

It’s necessary to notice that, whereas Dyson states that the HF1 is secure for household and pets as there are not any uncovered heater parts, it will seem this doesn’t eradicate the possibility of scalding, as I discovered that the metallic edging across the air shops turned too scorching to the touch inside simply a few minutes in Scorching mode at 73ºF / 23ºC.

Scorching mode begins off noticeably louder than Cool mode. The HF1 is pretty quiet for the primary few moments, then rapidly ramps up earlier than settling all the way down to a constant quantity. For instance, when utilizing Scorching mode at fan pace 5, the amount rapidly rose to 42dB, then settled all the way down to 37dB.

True to Dyson’s declare, the HF1 did enhance the temperature by a level in lower than two minutes, although I’m undecided how correct the temperature studying is in relation to the ambient temperature throughout a big room.